Operating instructions

31
Best picture quality - JPEG2000
Built In DVR
CHAP. 5 Set Up
5-7. FACTORY DEFAULT
Set the all system parameters as manufacturer first
set before delivery. It is a kind of system
initialization, and manufacturer recommends to do it
when you add new HDD or other changes in
system to make all system ready for normal
operation.
Use direction button to move and Press [ENTER]
button to change parameters. After move to RUN,
Press [ENTER] button for actual Factory Default
setting.
SELECT MENU : ▲▼, & [ENTER]
LANGUAGE ENGLISH
EXTERNAL DEVICE
FACTORY DEFAULT
RECORD SETUP
CONFIGURATION
DISPLAY SETUP
SYSTEM MENU
5-8. LANGUAGE SETUP
The menu can be displayed in a number of languages.
Press [ENTER] button to select your language.
FACTORY DEFAULT
SELECT MENU : ▲▼, & [ENTER]
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ALL
SCREEN DISPLAY
CAMERA SETTING
MOTION SETUP
PANTILT SERUP
SCHEDULE SETUP
CONFIGURATION
RUN
3) PAN/TILT SETUP
It is to set parameters for PTZ camera connected to DVR unit. DVR unit already includes all
protocols of well-known PTZ cameras like PELCO D type PTZ camera, and user just select MODEL
and set other parameters to control this PTZ cameras, using operation buttons on the front panel of
DVR. If PTZ camera whose protocol is not incorporated into this DVR unit, user must input protocol
of this PTZ camera by himself. Using USB device port, user can upgrade protocol for PTZ camera.
SELECT : ▲▼, & [ENTER]
COMMAND SETTING Å PTZ camera set
SPEED SETTING Å PTZ speed set
PAN/TILT SETUP
01
PELCO-D
000
2400 BPS
1 MSEC
PAN/TILT STOP
0.7
FF 00 00 00
00 00 00 00
SELECT : ▲▼, CHANGE VALUE : + -
CHANNEL
MODEL
PTZ ID
BAUDRATE
CMD DELAY
COMMAND
LENGTH
CODE
COMMAND SETTING
1) CHANNEL : Select channel
2) MODEL : Select camera model (protocol type) per each channel
3) PTZ ID : Select ID
4) BAUDRATE : Select data transmission speed
5) CMD DELAY : Select command delay time