Operating instructions

30
Best picture quality - JPEG2000
Built In DVR
CHAP. 5 Set Up
2) RS-232C SETUP
User can control the DVR via RS-232C port.
Connect DVR to PC via RS-232C port and control
DVR using keyboard of PC.
This function is mainly for programmer who
wants to control DVR as part of many devices
connected to PC system, as in SI project.
(2) CONNECTION SETUP :
- TIME OUT : Adjust TIMEOUT value properly to successfully access to DVMR unit via Internet
line. If data transmission speed is high enough, leave TIMEOUT value as set by
manufacturer (200 msec), and increase it if data transmission via Internet line is
relatively slow. Execute tracert (Tracing Route) in your PC for IP assigned to
DVMR unit, and you can figure out how much TIMEOUT value increased.
- RETRY COUNT : Set the retry number of times for network connection.
576000
8
1
NONE
SELECT : ▲▼, CHANGE VALUE : + -
SPEED
LENGTH
STOP BIT
PARITY
RS-232C SETUP
SELECT MENU : ▲▼, & [ENTER]
TIMEOUT 200 MSEC
RETRY COUNT 08
CONNECTION SETUP
MANUAL
000.000.192.168
192.168.001.160
255.255.255.000
192.168.001.001
SELECT : ▲▼, CHANGE VALUE : + -
DHCP MODE
DNS SERVER
IP ADDRESS
SUBNET MASK
GATEWAY
DHCP SETUP
5-6. EXTERNAL DEVICE
Set parameters of external devices connected to DVR, like Ethernet, PTZ camera, RS-232C, etc.
Use direction button to move to sub-menu and Press [ENTER] button to set.
_ _ _ _ _ _ _ _ _ _ _
00-0A-A2-00-00-00
_ _ _ _ _ _ _ _ _ _ _
192.168.001.160
_ _ _ _ _ _ _ _ _ _ _
50000
_ _ _ _ _ _ _ _ _ _ _
192.168.001.001
_ _ _ _ _ _ _ _ _ _ _
255.255.255.000
AUTOMATIC
SELECT MENU : ▲▼, & [ENTER]
MAC ADDRESS
IP ADDRESS
IP PORT
GATEWAY
SUBNET MASK
DHCP SETUP
IP CONFIG SETUP
1) TCP/IP SETUP
TCP/IP function enables user to see live pictures and
recorded pictures via the internet.
(1) IP CONFIG SETUP :
Show the network information assigned to the DVR
unit. If the DHCP setup status is AUTOMATIC, user
can set the IP port only and if the DHCP setup status
is MANUAL, user must set all parameters.
For detail procedure of Remote viewer program
installation, refer to CHAP. 6 Software
program.(Remote viewer software).