Operating instructions

12
Best picture quality - JPEG2000
Built In DVR
5) Connector Pin Assignment
6) RS-232C ASCII-code
Signal GroundGND5
9Data Terminal dataDTR4
RS232C: Rx/Tx dataCTS8Transmit dataTxD3
RS232C: Rx/Tx dataRTS7Receive dataRxD2
Data Set ReadyDSR6Data Carrier DetectDCD1
DescriptionNODescriptionNo
’!’CH11‘4’CH4‘Q’SEQ‘<‘-‘M’MENU
’0’CH10‘3’CH3‘I’PIP0x0dENTER‘E’SERCH
’@’CH12‘5’CH5‘L’J.SHU‘>’+‘U’UP
’^’
CH16‘9’CH9‘2’CH2‘D’MODE‘N’NEXT‘A’Pause
’%’
CH15‘8’CH8‘1’CH1‘F’FRZ‘K’RIGHT‘P’PLAY
’$’
CH14‘7’CH7‘Y’QPLAY‘Z’ZOOM‘H’LEFT‘S’STOP
’#’
CH13‘6’CH6‘C’KLOCK‘T’PTZ‘J’DOWN‘R’REC
Following ASCII-Codes(Hexa-Code) are for programmers who want to control DVR unit
via the RS232C Port using keyboard of PC.
(The following table is based on 16ch DVR.) All ASCII-Code is 1 Byte.
CHAP. 3 Installation