OBJ_DOKU-16887-002.fm Page 1 Wednesday, October 14, 2009 1:32 PM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen Germany www.bosch-pt.com 1 619 P07 577 (2009.
OBJ_DOKU-16890-002.fm Page 4 Wednesday, October 14, 2009 1:52 PM 4| 5| 2 3 20 1 9 22 6 21 4 11 12 6 5 7 7 15 13 15 8 9 19 16 14 17 10 18 11 1 619 P07 577 | (14.10.09) 12 Bosch Power Tools 1 619 P07 577 | (14.10.
OBJ_BUCH-952-002.book Page 21 Wednesday, October 14, 2009 1:34 PM English | 21 Safety Notes en General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
OBJ_BUCH-952-002.book Page 22 Wednesday, October 14, 2009 1:34 PM 22 | English g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
OBJ_BUCH-952-002.book Page 23 Wednesday, October 14, 2009 1:34 PM English | 23 f Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory.
OBJ_BUCH-952-002.book Page 24 Wednesday, October 14, 2009 1:34 PM 24 | English f Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces, if proper precautions are taken. f Never place your hand near the rotating accessory. Accessory may kickback over your hand.
OBJ_BUCH-952-002.book Page 25 Wednesday, October 14, 2009 1:34 PM English | 25 f Use extra caution when making a “pocket cut” into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback. Safety warnings specific for sanding operations f Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper.
OBJ_BUCH-952-002.book Page 26 Wednesday, October 14, 2009 1:34 PM 26 | English Functional Description Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. While reading the operating instructions, unfold the graphics page for the machine and leave it open.
OBJ_BUCH-952-002.book Page 27 Wednesday, October 14, 2009 1:34 PM English | 27 Technical Data Angle Grinder GWS 7-100 GWS 7-115 GWS 7-115 E GWS 7-125 Professional Professional Professional Professional Article number 3 601 C88 1.. 3 601 C88 1.. 3 601 C88 2.. 3 601 C88 1.. W 720 720 720 720 Rated speed min-1 11000 11000 11000 11000 Speed control adjustment min-1 – – 2800 – 11000 – Rated power input Grinding disc diameter, max.
OBJ_BUCH-952-002.book Page 28 Wednesday, October 14, 2009 1:34 PM 28 | English Technical file at: Robert Bosch GmbH, PT/ESC, D-70745 Leinfelden-Echterdingen Dr. Egbert Schneider Senior Vice President Engineering Dr. Eckerhard Strötgen Head of Product Certification Robert Bosch GmbH, Power Tools Division D-70745 Leinfelden-Echterdingen 25.09.2009 Assembly The protection guard for cutting 13 is mounted in the same manner as the protection guard for grinding 8.
OBJ_BUCH-952-002.book Page 29 Wednesday, October 14, 2009 1:34 PM English | 29 Grinding/Cutting Disc Pay attention to the dimensions of the grinding tools. The mounting hole diameter must fit the mounting flange without play. Do not use reducers or adapters. When using diamond cutting discs, pay attention that the direction-of-rotation arrow on the diamond cutting disc and the direction of rotation of the machine (see direction-of-rotation arrow on the machine head) agree.
OBJ_BUCH-952-002.book Page 30 Wednesday, October 14, 2009 1:34 PM 30 | English Approved Grinding Tools Dust/Chip Extraction All grinding tools mentioned in these operating instructions can be used. f Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health. Touching or breathing-in the dusts can cause allergic reactions and/or lead to respiratory infections of the user or bystanders.
OBJ_BUCH-952-002.book Page 31 Wednesday, October 14, 2009 1:34 PM English | 31 Switching On and Off To start the power tool, push the On/Off switch 2 forwards. To lock the On/Off switch 2, press the On/Off switch 2 down at the front until it latches. To switch off the power tool, release the On/Off switch 2 or, if it is locked, briefly push down the back of the On/Off switch 2 and then release it. f Check grinding tools before using. The grinding tool must be mounted properly and be able to move freely.
OBJ_BUCH-952-002.book Page 32 Wednesday, October 14, 2009 1:34 PM 32 | English When cutting, work with moderate feed, adapted to the material being cut. Do not exert pressure onto the cutting disc, tilt or oscillate the machine. Do not reduce the speed of running down cutting discs by applying sideward pressure. The machine must always work in an up-grinding motion. Otherwise, the danger exists of it being pushed uncontrolled out of the cut.
OBJ_BUCH-952-002.book Page 33 Wednesday, October 14, 2009 1:34 PM English | 33 In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. After-sales Service and Customer Assistance Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under: www.bosch-pt.
OBJ_BUCH-952-002.book Page 34 Wednesday, October 14, 2009 1:34 PM 34 | English Disposal The machine, accessories and packaging should be sorted for environmental-friendly recycling.
