Specifications

Inputs

• RS Room temperature sensor (Rnet)

• RS Room temperature sensor Set point adjust (Rnet)

• RS Room temperature sensor Occupancy override (Rnet)

• Discharge air temperature sensor

• Leaving water temperature sensor

• Unit Protection module (UPM) Alarm codes (7 safety shutdown alarms)

• Unit Filter status (optional)

• Unit Enable manual control (optional DI Enable)

Outputs

• Unit blower control

• Reversing Valve

• Cooling Stage 1

• Cooling Stage 2 (Comp 2 Circuit or Comp1 Stage 2)

• Humidity control output (optional Hot gas re-heat)

• Auxiliary/Emergency Heating Stage (optional Electric Heat)

Control & Status Parameters and Alarms

Control

• BACview occupancy schedule

• System control: Schedule, Manual ON, BAS command or DI Enable

• Room temperature occupied cooling/heating set point

• Room temperature unoccupied cooling/heating set point

• Unit blower control

• Reversing valve control

• Compressor 1 control

• Compressor 2 control (Comp 2 Circuit)

• Unit Enable manual control (optional)

• Humidity Control ( hot gas re-heat optional)

• Auxiliary/Emergency Electric heat output control (optional)