Use And Care Manual

Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and

changing accessories. Inspect tool cords periodically and if damaged, have them repaired by an autho-

rized service facility.

Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts

in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a

dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all

working controls free of dust.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualied persons in order to avoid a hazard.

If your power tool becomes too hot, set the speed to the maximum and run no load for 2-3 minutes to

cool the motor.

Always ensure the work-piece is rmly held or clamped to prevent movement.

The pivoting foot must be held rmly against the material being cut to reduce saw vibration, blade jump-

ing and blade breakage.

WORKING HINTS FOR YOUR RECIPROCATING SAW

D E