Specifications

Personal Security Data Book |87
LBB 6507
Personal Security Software
for LBB 6000
Communication you can rely on
• To manage up to 512 personal
security mobiles
• To generate DP 6000 calls, Auto-
matic scan calls, Direct calls,
Alarms calls and PST test calls.
• To receive and respond to PS
Scan calls, Call desk, Test calls,
PST on/off calls, no-move, manu-
al, tilt, tear out and fast move
alarms.
• Relay control optional.
Introduction
The Bosch PS 6000 software package LBB 6507, has been
designed for use in PS 6000 paging systems, using the PC
extension card LBB 6000 , PCB board LBB 6001 and the
audio unit LBB 6004.
The PS 6000 software package has been designed to
manage all PS 6000 functions as well as location
detection functions available with the PS 6000 system.
Location detection on the tranceivers is an optional
feature, and is dependent on the transceiver hardware.
For extended alarm features, the PS 6000 system can be
further extended using relay board type PCL 725, or if
the Multi-Purpose Coupler software package LBB 6501 is
installed, the multi-purpose coupler relays can be used.
Once the PS 6000 software has been installed,the PC is
capable of managing and controlling up to a maximum
of 512 personal security mobiles (PS transceivers,
PS-Micro’s and DECT6000 PS Handsets), divided in to
groups of 16 and 32 (programmable). The status of each
group can be displayed individually.
Display
Simply by pressing a function key <F9> , the PC display
screen can be toggled between the LBB 6000 paging
operator screen and the status screen of the PS mobiles.
However, in the event of a PS alarm, field call or system
alarm, the display automatically displays the status of the
PS mobiles. In addition, information about a selected
channel can also be displayed using the <Cursor> and
<Enter> keys.
If location detection is enabled, the current location of
the PS mobile holder can be viewed.