Specifications

Personal Security Data Book |85
• To establish ‘Dial-in’
communication from a
transceiver to a central control
post within the paging system.
• To establish communication from
one transceiver to another
transceiver or pager in the
system.
• For use with a PC fitted with a
master extension card LBB 6000
and speech and talk-back card
LBB 6001.
Introduction
The Bosch Dial software package LBB 6506 has been
designed for use in a DP 6000 system in combination
with a PC fitted with a master extension card LBB 6000
and a speech and talk-back card LBB 6001.
The dial software can be used for both ‘dial-in’ and ‘dial-
through’functions:
Dial-in
To establish communication from a transceiver in the
field, to a central control post within the system (e.g.
audio unit of an alpha desk).
Dial through
To establish communication from a transceiver in the
field to another transceiver or pager.
Dialing signals can be detected in both DTMF format or
in DP 6000 code. This makes the software suitable for use
with both the second generation transceivers using dial
transmitters LBB 6062 and LBB 6162, as well as the third
generation dial transceivers LBB 6064 and LBB 6066.
The third generation dial transmitters (if programmed
correctly) will transmit their own identity to the central
control desk along with the call data. This enables the
desk to place the identity of the caller on the PC display
or to send it through to the display of the transceiver that
is being called.
Description
Once the pre-programmed access code has been dialled
(for ‘dial-in’ or ‘dial- through’) the transceiver holder can
enter the selectable address digits, plus the bleep pattern
digits and numeric information for dial through, or just
the address digits of the central desk when using ‘dial-in’.
Dial-in
Using the software package the desk can be programmed
for manual or automatic operation. If programmed for
automatic operation, the speech channel to the audio
unit is opened automatically after the ‘dial-in’call is
received. The audio unit initially gives an audible
indication to draw the attention of the operator.
Depending on the type of transceiver that is calling (third
or second generation) the PC display shows the identity
(name or number) of the caller.
LBB 6506
Dial Software Package
for LBB 6000
Communication you can rely on