Specifications

Personal Security Data Book |81
• Allows the connection of up to
eight external RS 232 devices
• Protocol editor allowing the
adaption to any external RS 232
device
• Applicable for use with both
RS 232 inputs and outputs
• Generates protocol editor data
files and stores them on disk
• Supports multi-drop, command
based, and string input protocols
The Bosch RS 232 software package
LBB 6503 has been designed to build and edit one’s own
tailor-made communication protocols, thus providing the
capability to communicate with almost all external RS
232 devices that may be connected to the alphadesk.
The RS 232 software is able to support and control up to
8 external RS 232 devices connected to a single paging
alphadesk via its RS 232 port, or via RS 232 extension
cards.Each port can be defined as either an input or as
an output or, each can be defined as both an input and
an output.
External RS 232 devices connected to the alphadesk
might include an alarm monitoring system such as those
used in a factory, hotel or hospital for example. Such
systems using their RS 232 facility are able to transmit
alarm data which in turn can then be converted in to
paging calls.
The programmes menu driven software is an add-on
extension to the standard alphadesk software LBB 6000.
Using the LBB 6503 software a complete protocol can be
structured from the following pull-down menus:
- COM port settings
- PROTOCOL specifications including:
- Communication specification
- Message specification
- Message conversions
COM Port Settings
The parameters entered under this menu define the
communication parameters applicable for each external
RS 232 device connected to the alphadesk
PROTOCOL specification
Under the Protocol specification menu a complete
protocol can be structured using the following sub-
menus’.
- Communication specification
- Message specification
- Message conversions
LBB 6503
RS 232 interface Software
for LBB 6000
Communication you can rely on