Specifications

Personal Security Data Book |77
• For use with PC Alphanumeric
Interface Card LBB 6000
• Facilitates the connection of up
to 31 couplerheads, providing
up to 992 input contacts and up
to 62 relay outputs.
• Programmable input contacts
with numeric or alphanumeric
information
• Programmed calls repeated up to
255 times
• Up to 32 preprogrammed
call-cycles
Introduction
The Bosch LBB 6501/00 Multipurpose Coupler Software
package has been developed for use with the
Alphanumeric PC Interface card LBB 6000.
The Software package facilitates for up to 31
multipurpose coupler heads (type No. LBB 5843/01), to
be connected to the RS 485 input/output on the
Alphanumeric Interface card installed in a PC. This
facility provides for up to 992 input contacts used for
paging calls and other functions, and up to 62 relay
outputs.
Functional description
The software package provides the following:
Contact inputs
Each input contact may be programmed as a call input,
presence input,or a reset input for a paging call, or it
may be used to start a reroute function. In addition it
may also be programmed as a control input for one or
more of the relay outputs. If a contact is programmed as
a ‘Call Input” there are four possible procedures which a
call (cycles) can be programmed for each input:
(1)A call plus information (Numeric and/or
Alphanumeric) is transmitted and repeated a number
of times. The number of repeats can be programmed
between 0 and 255 times. The repeat time can be
programmed for a duration of between 0 and 255
seconds.
(2)A call plus information (Numeric and/ or
Alphanumeric) is transmitted and repeated a number
of times. If no reaction is given (by activating a
presence contact) before the maximum number of
repeats,an assistance call will be transmitted
containing the same information to another pre-
programmed pager address. The bleep pattern of this
call is freely programmable.
This call will also be repeated a maximum number of
times or until a presence contact is activated.If the
call contact is activated again while the presence input
is active, the assistance call will be transmitted
immediately, and will be repeated until the presence
contact is activated again.
LBB 6501/00
Multipurpose Coupler
Software for LBB 6000
Communication you can rely on