Specifications

Personal Security Data Book |73
• System capacity for over 10,000
receivers
• Pre-installed HARDWARE AND
SOFTWARE
• Speech, Talk-back, Talk-through
• Conversions on adress and info
• Absence signalling
• 48 digit alphanumeric messages
possible
• 5-digit numeric messages
• Extendable with software pack-
ages for multipurpose coupling,
RS232 coupling, logging, dial
coupling
• PS 6000 and DECT 6000
functionality
Introduction
The Bosch Alpha desk Server is designed to operate as an
encoder in a Bosch DP6000 paging system used to
accompany paging calls with numeric or alphanumeric
information messages.
The server is delivered with a 2.5 m cable, terminated
with a 16-pole Hirschmann plug for connection to the
system cabling and a 25-pole Sub-D connector for con-
nection to the LBB 6000 server. The server has a 25-pole
D-type connector for connection to the paging line, and a
9-pole D-type connector for an RS 485 connection to
coupler heads (type LBB 5843/01).
Optional
For speech, talk-back and Personal Security functions the
LBB 6000 server can be extended with the LBB 6001 card,
which plugs on to the LBB 6000 card without using an
extra slot space in the Server. The LBB6001 card is deliv-
ered with a bracket with two 9-pole Sub-D connectors,
one for connection to an audio unit and the other is used
as the output of two relay switches on the PCB.
In combination with the audio unit LBB 6004, which
incorporates a microphone and loudspeaker, paging calls
from the PC with speech and talk-back are possible.
Dependent on the software package different functions
are possible.
LBB 6000/50 functions
A DP6000 Alpha desk server, and basic software can be
used for the following:
Calls from the Keyboard
Paging calls can be made either by selecting a name from
a name list, or simply by inserting the selectable digits
and characters making up the paging call.
If a call is made via the name list, those functions that are
applicable to the targeted receiver will be enabled auto-
matically. A maximum of 800 names can be programmed
in this list.
More than one receiver can be called by making a serial
call (selected from the name list) or by making a group
call which can be made from a separate menu, where a
maximum of 100 group calls can be pre-programmed.
A call can also be made by entering the required call
number and information characters via the menu
LBB6000/50
Alpha Desk server
LBB6001, LBB6004
Communication you can rely on