Specifications

52 | Personal Security Data Book
TECHNICAL SPECIFICATIONS
Transmitter
ELECTRICAL
Power consumption: 12 Volt, 0.3 A
Output: 50 mW in to a 50 Ohm real impedance load
Power supply output: 12 Volt, 400 mA fused
Modulation: FM
LBB 6019/.. (UHF)
Frequency bands: 409 - 470 MHz
Channel spacing: 20 kHz 12.5 kHz
Deviation: 4 kHz* 2 kHz
Connections: Power supply (4 pin Minifit)
System cable (RJ 45)
Antenna (N-type Female)
HF sync (VHF BNC Female)
MECHANICAL
Dimensions: 270 x 195 x 81.5 mm
Weight: approx. 2 kg
Cables: Patch cable 2.5 m, terminated with 2 x RJ45
ENVIRONMENT CONDITIONS
Operating temperature: - 20 °C - +55 °C
Storage temperature: - 40 °C - +70 °C
Humidity: 95% non condensing
Bosch Security Systems B.V.
www.boschsecuritysystems.com
9922 141 50032 en 01-1 | Printed in The Netherlands | Januari 2004 • Data subject to change without notice.
SAFETY REGULATIONS:
Paging directive: ETSI EN 300 224-2 (2001)
EMC directive: ETSI EN 300 682 (1997)
R&TTE directive: 1999/05/EC
Safety directive: IEC 60950 (1999)
Power supply (adapter type)**
Mains supply: 100V - 240 V
47 Hz - 63 Hz
Power consumption: 700 mA
Output: 12 Volt dc, 2.5 A
Cable length:2 m
MECHANICAL
Dimensions: 105 x 68 x 80 mm
Weight: Approx. 250 gr
* Factory setting
** Power adapter supplied with transmitters
Traditional paging product, non-harmonised frequencies used,
local approbation needed when used outside the EU.
Apart from EU-member states, most EEA and EFTA countries
and candidate member states are implementing the R&TTE
directive.