Specifications

50 | Personal Security Data Book
TECHNICAL SPECIFICATIONS
Transmitter
ELECTRICAL
Power consumption: 12 Volt, 2.5 A max
Output: Adjustable between 0.5 and 5 W in to a
50 Ohm real impedance load
Power supply output: 12 Volt, 400 mA
Modulation: FM
LBB 5868/.. (UHF)
Frequency bands: 409 - 470 MHz
Channel spacing: 20 kHz 12.5 kHz
Deviation: 4 kHz* 2 kHz
LBB 5888/.. (VHF)
Frequency bands: 25 - 50 MHz
Channel spacing: 10 kHz
Deviation: 2 kHz*
Connections: Power supply (4 pin Minifit)
System cable (RJ 45)
Antenna (N-type Female)
HF sync (VHF BNC Female)
MECHANICAL
Dimensions: 270 x 195 x 81.5 mm
Weight: approx. 2 kg
Cables: Patch cable 2.5 m, terminated with 2 x RJ45
Bosch Security Systems B.V.
www.boschsecuritysystems.com
9922 141 50022 en 01-1 | Printed in The Netherlands | Januari 2004 • Data subject to change without notice.
ENVIRONMENT CONDITIONS
Operating temperature: - 20 °C - +55 °C
Storage temperature: - 40 °C - +70 °C
Humidity: 95% non condensing
SAFETY REGULATIONS
Paging directive: ETSI EN 300 224-2 (2001)
EMC directive: ETSI EN 300 682 (1997)
R&TTE directive: 1999/05/EC
Safety directive: IEC 60950 (1999)
Power supply (adapter type)**
ELECTRICAL
Mains supply: 100 V - 240 Vac
47 Hz - 63 Hz
Power consumption: 700 mA
Output: 12 Volt dc, 2.5 AENVI
MECHANICAL
Dimensions: 105 x 68 x 80 mm
Weight: Approx. 250 gr
* Factory setting
** Power adapter supplied with transmitters
Traditional paging product, non-harmonised frequencies
used, local approbation needed when used outside the EU.
Apart from EU-member states, most EEA and EFTA
countries and candidate member states are implementing
the R&TTE directive.