Specifications

Personal Security Data Book |37
LBB 6070
PS6000 Location Transmitter
Communication you can rely on
• Compact and rigid glass-fibre re-
inforced polyester housing suit-
able for use in industrial climates
• Front-mounted LED indicating
unit power
• More than one million location
addresses can be distinguished
• Easy address programming using
five rotary switches
• Adjustable transmission range
from 0.5 to 4.5 meters
• Compatible with PS-micro,
PS-tranceiver and PS-DECT mo-
biles with location detection
Introduction
The LBB 6070 Location Transmitter has been designed
for use in combination with PS6000 Personal Security
Systems. Housed in a compact and rigid glass fibre rein-
forced polyester housing, the transmitter is ideally suited
for use in industrial environments (dust and waterproof
according to IP65).
Special cover securing screws are delivered, with the unit,
providing added security in hostile environments.
The Location Transmitter transmits a programmable
location code approximately 20 times per second. When a
person carrying a PS-mobile receives this code, it relays
the location code to the central control unit.
Using the location codes it has received, the PS system
can keep track of a transceiver carrier’s current position
and heading (see fig. 1).
Location addresses
The location code transmitted by the Location
Transmitter is programmable using five rotary switches
accessible after opening the unit. More than one million
different addresses can be programmed.
Placement considerations
The unit has to be mounted in a vertical position oppo-
site a door or any other place where the transceiver carri-
er has to pass.
Power supply
The Location Transmitter has to be powered using a stan-
dard external d.c. power adaptor. This adaptor must be
able to provide 12 to 15 V d.c. power at a current of
approximately 180 mA. The power cable can either be
connected invisibly via a hole in the bottom of the hous-
ing, or via a cable locking screw at the side of the hous-
ing.