Specifications

Personal Security Data Book |29
• Versatile range of personal alarm
transmitters
• Small, unobtrusive and elegant
design
• Easy accessible manual alarm
button
• A variety of automatic alarms
such as ‘tear-out’ and ‘no-move’
alarm
• Optional with location detection
• Integrated antenna
• Monitoring of good functioning of
the mobiles in the system
Introduction
The Bosch PS-Micro Alarm Transmitters LBB 6030 - LBB
6035 are intended for use in the Bosch Personal Security
system in combination with a dedicated central control
LBB 6000\LBB 6001 (Alphadesk PC) with the PS-Micro
software package LBB 6509 or the PS-micro controledesk
LBB6105.
The mobiles can also be used in existing PS systems in
combination with Generation III transceivers type
LBB 6065/xx,LBB 6066/xx using PS software package LBB
6507.
Range of transmitters
Incorporating Surface Mounted Device (SMD) technology,
the range of transmitters are small and compact with an
elegant but sturdy and robust design making them
unobtrusive to the holder. This versatile range of mobiles
provides a choice of alarm options to cater for most
personal security requirements (refer to Table 1).
All transmitters incorporate an easily accessible manual
alarm button (red),providing the user with a simple to use
one button operation to initiate a manual alarm.
A choice of in-built automatic alarms, such as ‘No-move’,
‘Not-vertical’ and ‘Tear-out’are also available where no user
input is required.An optional location detection feature
provides location information in systems installed with
location detection transmitters/beacons.
Operation
The mobiles are capable of transmitting two types of calls
for the attention of a central PC operator:‘Alarm’calls and
‘Check-in’ calls.
• ‘Alarm’calls are initiated by the mobile holder pressing
the manual alarm button (manual alarm) or by the mo-
bile itself when in a motionless/angled state for a pro-
longed period of time or when the ‘tear-out’plug has
been removed from its socket.
• ‘Check-in’calls are silent calls sent periodically to the
central control PC to check the operational status of the
mobile(s).The period between check-in calls is pro-
grammable using software package LBB 6509 and varies
depending on the number of mobiles used in the system.
LBB 6030 - LBB 6035
PS 6000
PS-Micro Alarm Transmitters
Communication you can rely on