Specifications

26 | Personal Security Data Book
Power
The transceiver is powered from three LR1 batteries
which may be either disposable or rechargeable. The
transceiver incorporates an automatic battery saving
function. This function ensures that the available power is
used efficiently. When the battery voltage drops below an
acceptable level, an audible signal, and if fitted with an
alphanumeric display, a visual signal indicates this
condition.If rechargeable batteries are used,they are
recharged when the transceiver is placed in the storage
rack. To conserve energy all essential circuitry is
automatically switched off in the stand-by mode.
Microphone
Loudspeaker
Enter
Light
Menu
Recall
P
1
2
3
4
5
6
7
8
9
0
Fig.1 Rear of view of transceiver.
Fig.2 Front view of transceiver.
Alarms
All transceivers are equipped with a system-dependent
out-of-range detection facility which warns the user if the
transceiver is outside the area covered by its particular
DP6000 system. For this function one of the system
encoders should also be programmed accordingly.