Specifications

Personal Security Data Book |25
Addresses
The transceiver can have up to 8 different addresses as
follows:
1 x ALL call address
2 x Individual call addresses
5 x Group call addresses
On reception of a call, the transceiver holder can press the
‘Press to-Talk’button and speak into the transceiver’s
built-in microphone to the originator of the paging call.
In this manner a two-way verbal conversation (talk-back)
is established.A talk-through mode can also be selected
allowing two transceiver holders to converse with each
other. If the transceiver is in the storage rack an absent
indication is passed to the caller.
Programming
Initially, the transceiver is programmed by the DP6000
system manager who, amongst other things,determines the
system call codes and the individual and group call
addresses.A switch located in the transceiver’s battery
compartment enables a paging system manager to program
the unit from the DP6000 control desk. This can be done
while the transceiver is housed in its storage rack or it can
be done in a wireless type situation. The user can also
choose a number of pre-selections such as bleeper on/off,or
bleeper loud/soft.The number of available functions which
can be pre-set via the menu is predetermined by the system
manager.The user can also program nine numbers to serve
as quick dial memory positions.
Alphanumeric display Character set