Specifications

Personal Security Data Book |19
Standard features
All receivers in the range are equipped with a low battery
warning, battery saving facility and absent indication.
Low battery warning
If the pager detects that its batteries are in a low-level
state, the receiver holder will be informed with an audible
warning bleep and/or display information before
eventually switching off, if no action is taken within 60
minutes.
Battery saving
The receiver includes a built-in battery saving facility to
economise on battery use. This facility switches the
receiver On/Off periodically to reduce battery current.
Absent indication
If a call is sent to a receiver placed in a storage rack
(receiver holder left the premises) an absent indication
will be sent back to the caller. The system can also be
programmed such that the call will also be rerouted to a
second pager or group of pagers.
Out-of range indication
An out-of range function is incorporated in all receivers
to alert its user when the receiver has been taken out-of-
range of the system transmitters.
The central transmits an out-or-range signal every 30
seconds.If a receiver fails to receive any valid DP6000 call
within approximately 60 seconds the receiver will give an
out-of range signal.
This signal consists of a continuous bleep signal until
reset by the user (with a ‘time-out’of 62.5 seconds).
For versions with an alphanumeric LC display, the ‘out-
of-range’icon blinks.In numeric versions the display
shows (0-0-0) followed by (-0-0-). If the receiver is not
brought back in range within 30 minutes it switches itself
off automatically after first emitting a long warning bleep.
The ‘out-of-range’ facility can be enabled or disable by the
system installer.
Type No. overview