Specifications

104 | Personal Security Data Book
The communication is terminated on a reset command
from the dial transceiver, on busy tone detection from the
extension line,or on time-out after 10 seconds of no
conversation between the transceiver and another pager.
Construction
The dial-coupler consists of two PCBs which are built in a
plastic casing which is suitable for wall or desktop
mounting.
A cable (2 m) with a 16-pole Hirschmann plug is
supplied with the unit for connection to the DP6000 line.
A connection block is available on the PCB for the 2-wire
connection to the extension line of a PABX or directly to
a DP6000 telephone coupler.
Bosch Security Systems B.V.
www.boschsecuritysystems.com
9498 973 07515 01-1 | Printed in The Netherlands | Januari 2004 • Data subject to change without notice
TECHNICAL SPECIFICATIONS
Electrical
Supply voltage: 10.4 - 14.4 V
Supply current: 180 - 200 mA
DP6000 output to paging lines: 2.2 Vpp
Input level from TB lines: 0.2 - 2.2 Vpp
Talk-back line level: current loop : -4 mA DC
DP6000 line level: normal: -14V
priority: -7V
DP6000 line impedance: 3 wire system: < 10 Ohm
4 wire system: 600 Ohm
PABX input level: -12, -6 of 0 dB
DTMF input: sensitivity adjustable amplification
(only in combination with LF-adjustment)
LF input sensitivity: min. 77.5 mV
LF input adjustable
amplification: range: 20 dB
Clipping level: 1 V
MECHANICAL
Dimensions: 236 x 188 x 52 mm
Housing: ABS
Colour: beige/brown
Weight: 1 kg
ENVIRONMENTAL
Operating temperature: -10 to +55 °C
Storage temperature: -40 to +70 °C
Relative humidity: 10 - 95%
SAFETY
According to: IEC 65 (1985)