Technical information

- 44 -

Workshop Manual__3 - 4 LD_cod. ED0053025560_4° ed_ rev. 03

TYPE OF SEALANT

LOCTITE 270

Clutch bearing bell and embedded hexagonal-head screws

Control pin threading

Coupling nipple for oil lter cartridge

Stud bolt for clamping on engine head

Stud bolt for clamping on main bearing ywheel side

Stud bolt for clamping on distributor port side

Stud bolt on engine bell

Clamping screw for pin regulator

Clamping screw for bafe on air conveyor

Stud bolt for clamping on engine ange bell

Rocker arm fulcrum pin for injection pump control

Bracket clamping screw on side plates

Stud bolt for clamping at feeding pump

POSITION

USE OF DOPE FOR 3LD 450 - 3LD 510 - 3LD 451/S - 3LD 510/S

POSITION

Bearing on port or bell

Regulating pin threading

Stud bolt for clamping on engine head

Stud bolt for clamping on main bearing on ywheel side

Stud bolt for clamping on distribution side

Lock screw for rocker arm pin

Clamping screw for regulating pin

Industrial port

Stud bolt for clamping on feeding pump

USE OF DOPE FOR 4LD 640 - 4LD705 - 4LD 820

LOCTITE 270

DOW CORNING Q3 - 7091SILICONE

LOCTITE 270

TYPE OF SEALANT

Main torque specications and use of sealants