User guide

Security System User’s Guide
LED Command Center User’s Guide
46840C Page 46 Copyright © 2002 Radionics
Glossary
24-hour Point
Points that are always on even when the system is
turned off. Two types: Fire Points and Non-Fire 24-hour
Points.
All On
To turn on all of the points in the system.
Burglary Alarm Tone
A constant warble tone.
Bypass
To selectively remove points temporarily from the
system.
Central Station
A facility where trained personnel monitor your security
system 24 hours a day. Your security system may be
programmed to contact the central station during alarm
conditions, enabling central station personnel to
dispatch the proper authorities.
Controlled Point
Point that reports alarm conditions only when the
system is turned on.
Entry Delay
A programmed delay of the system alarm responses
that allow you to enter the building through the entry
door to turn your system off. An alarm response will
begin if you do not turn the system off before the entry
delay expires. Entry delay is programmed by your
security company.
Error Tone
The same warble tone as the Trouble Tone, but not
repeated.
Exit Delay
A programmed delay of the system alarm responses
that allow you to exit after turning the system on. An
alarm response will begin if you do not exit the building
before the exit delay expires. Exit delay is programmed
by your security company.
Faulted Point
A point that is not normal (e.g. - an open door or
window).
Fire Alarm Tone
A warble tone that is on for one second, then briefly off
(repeatedly).