Specifications

CLASS # 19
NEIKO DRILL BIT SHARPENER
This is a quick, easy, and accurate sharpener for your everyday drill bits.
It has a 0.5 Amp motor that spins the grinding wheel at 1,420 RPM. and it’s
thermally protected in a high-impact plastic housing. It’s equipped with a 6’
cord and a heavy duty rear mounted on/off switch.
This unit has two sharpening heads and two extra grinding stones. The
first head will sharpen bits from 1/8” to 3/8” (3.5mm – 10mm). The second
head will sharpen from 5/16” all the way up to 5/8” (8mm – 16 mm). It’ll
sharpen all your 29 pc. Bits and a couple of the Silver & Deming bits over
1/2”. Not recommended for split point drill bits. IMPORTED
ITEM#: DESCRIPTION:
AE128 NEIKO ELECTRIC DRILL BIT SHARPENER