Specifications

CLASS # 19
135 AMP FLUX/MIG WELDER
This heavy duty, portable, 135 Amp, ‘Tweco Style’ Flux/Mig welder is a
compact 115 volt unit that will breeze through Mig welds on a wide range of
materials including mild steel, stainless steel, and aluminum. It also handles
flux-cored welds on mild steel with ease, so you’ll get through any repair or
project in no time!
The large, easy to set, easy to read knobs provide adjustable tap voltage
control and a continuous full-range control of wire feed speed. The attached
wire feed driving wheel has two types of wire groove; one for 0.6 mm solid
core welding wire, the other for 0.8 mm solid core welding wire or 0.9 mm
flux-cored wire.
Comes with torch, air pipe, work clamp, adjustable mixed-gas regulator,
(CO
2
or mixed gas CO
2
combined to Ar), 1Kgs Spool of 0.6 mm MAG Wire,
0.8mm , 0.9mm contact tip, wire brush/hammer, and operator’s manual.
Specifications:
9 Gas / No Gas, Tweco compatible torch
9 Dual Gauge Regulator
9 Extra long 8” Torch Cable & 4.5’ Gas Nose
9 Auto Temperature Protection
9 For Flux Core Wire & Solid Wire
9 115V ~ 60HZ
9 Range of current: 25 – 135 Amp
9 Input Capacity: 3KVA
9 Fuse: 25A
9 Imported
ITEM#: DESCRIPTION:
MIG 135 Amp FLUX / MIG WELDER