Specifications

CLASS # 19
ANALOG MULTITESTER
Manufactured by Sunwa Scientific Instrument Ltd. one of the worlds
largest manufacturers of test instruments. The multitester is used to
measure electric and electronic components for testing and servicing.
This multitester will accurately test AC voltage, and DC voltage.
They are DC amperage, transistors & diodes and used by almost any
contractor, repairman or industrial tool buyer. The unit is fuse and diode
protected for a long service life. This means if you accidentally try to
measure micro amps or volts and the amperage or voltage is greater than
the selected range, the unit will pop the fuse instead of burning out the
meter. This safety feature is found on the more expensive brands of
multitesters.
ANALOG MULTITESTER
ITEM#: 228
THE SPECIFICATIONS ARE AS FOLLOWS;
DC VOLTAGE - 0.1 TO 1000 VOLTS ,+/- 3 AT FULL SCALE DEFLECTION
AC VOLTAGE - 10 TO 1000 VOLTS ,+/- 4 AT FULL SCALE DEFLECTION
DC CURRENT - 50 MICRO AMP TO .25 AMP AT FULL SCALE DEFLECTION
RESISTANCE - .2 TO 20 MEG OHM AT FULL SCALE DEFLECTION
TRANSISTOR CURRENT LEAKAGE - 150 MICRO AMP TO 150 MILLIAMP
TRANSISTOR DC AMPLIFICATION TEST - 0 TO 1000 MICRO AMPS
UNIT COMES COMPLETE WITH BATTERIES AND THE TEST PROBES.