Specifications

CLASS # 19
50 AMP MULTIPURPOSE WELDER
This multipurpose welding machine features industrial technology in a
200Amp DC Tig Welder and a 50Amp continuous arc plasma cutter, which
means the arc can be ignited in the air and will not go out when you have to
go through metal. It has the most powerful torch available without needing a
water cooler unit. (Caution: torch gets extremely hot on long welds).
The high frequency DC plasma cuts thicker materials than standard DC
plasma cutters and cuts faster with less distortion in your metal. It will make
a severance on 1” steel at 3” per minute and a quality cut on 1/2” steel at 17”
per minute. The internal, high speed cooling fan regulates temperature and it
has built in thermal and overload protection.
Specifications:
• 50 amp cut draws 25 amps
• No-Load voltage: 230V, 100-115V
Working Range
• Dual Voltage: 110/120 Single Phase,
208/220 Single Phase
Plasma Cutting Specs:
• 100% duty cycle @ 40 amp,
60% @ 50amp
• Air requirement: 4cfm @ 65psi
• Cutting Capacity: 1” Steel (severance
cut), 1/2” (quality cut)
• Duty Cycle: 60% @ 50amp
Welder Specs (Tig and Arc):
• 200 amps DC Tig Welder
• Duty Cycle: 60% @ 200 amp
• ARC and 100% @ 95 amps ARC
• Gas Flow: 2-5 L/Minute
• Duty Cycle: 60% @ 160 amp/ 100% @
110 amps
• Can weld all stainless steel
• Does not weld aluminum
ITEM#: DESCRIPTION:
N186 MULTIPURPOSE WELDER/PLASMA CUTTER