Specifications

CLASS # 19
60 AMP PLASMA CUTTER
Plasma cutters are fast, clean, and can cut intricate patterns that torches
cannot and, there is little de-burring required. They swiftly cut steel, carbon
steel, stainless steel, aluminum and even copper. It uses shop air (only 4cfm
at 70psi) and no special gases are required.
This powerful 60 amp plasma cutter will easily cut through steel up to
1-1/4” thick. Includes torch assembly, grounding clamp, 3 electrodes, 3 tips
and air hose.
Specifications:
• 60 amp cut draws 31 amps
• Cuts through steel up to 1-1/4" thick
• 220 Volt Single Phase
• 100% duty cycle @ 40 amp
• Air requirement: 5 CFM @ 55psi
• Dimensions: 20”L x 12”H x 7”W
• Includes: torch assembly, grounding
clamp, air pressure regulator with
bracket, 3 electrodes, 3 tips & air hose
• Weight: 55 lbs.
• Import
ITEM#: DESCRIPTION:
N185 60 AMP PLASMA CUTTER – 1-1/4” CAPACITY
30KIT 30 PC. ACCESSORY KIT FOR N185
(Accessory kit includes: 13 tips, 13 electrodes & 4 shield cups)