Operating instructions

Power Tools
V
Power Tools
Power Tools
V - 77
800-BUY-BAER (289-2237) • www.baersupply.com • Fax: [phone]
EDGEBANDING SYSTEM
• Can handle hot-melt adhesive wood and polyester edge banding and comes
complete with a heavy-duty industrial heat gun
• The guides are completely adjustable and will accommodate materials as wide as 2-1/4”
• Capable of applying edge banding to straight and curved edges
Packing & Sold In: Each
Item#
ABEB100
EGDEBANDER
Hand Held, Hot Air
• The only manual bander with tracking of tape on the board
• For pre-glued PVC, polyester, melamine, and wood veneer of up to 2” wide (50mm)
• A set of rubber clamps hug the board so you can get the most accurate tracking of the tape on the board
• Easy adjustment and application on contour edge banding
• Minimum interior radius: 2”
• Two step temperature switch:
- Step one: 300˚C or 570˚F
- Step two: 525˚C or 1,000˚F
• Air delivery: 400 L/min. or 16 CV. feet/min.
• Set up time of less than 1 minute
• Weight: 6 lb. (2.7 kg)
Packing & Sold In: Each
Item#
VXAG98
EDGEBANDING SYSTEMS
Power Tools
Power Tools