Operating instructions

Power Tools
Power Tools
V - 62
Würth Baer Supply Company • Over 40,000 products in-stock EVERYDAY!
Power Tools
CIRCULAR SAW
Plunge Cut Design
• Festool model #: TS55EQ
• For solid wood, ne veneer panels, sheet goods-plastic
and aluminum
• Quick and easy cutting depth adjustment, cutting depth 2.17”
• Bevel unit allows you to swivel the blade up to 45 degrees
on the guide rail for clean cut edges even on bevel cuts
• Detachable Plug-it cord, if the cord gets damaged, plug in
a new one
• Rotating dust extractor connector, easy to adjust the dust
extraction
• Spring-loaded riving knife, retracts into the housing
automatically during plunge cuts
• MMC electronics with 6 control and monitoring functions,
including soft start, constant speed under load, stepless speed
adjustment, temperature and current-triggered overload
protection
• FastFix saw blade changing system for easy blade change
• Triple motor bearing, improves running smoothness and
extends service life
• Zero-play guidance, adjust the saw base on the guide rail
without tools
• Splinter guard on both sides of the cut, guide rail rubber splinter
guard on one side, attachable plastic splinter guard on the other
• Includes: (1) 55” Guide Rail (491498), (1) 48-Tooth Carbide Blade
(491952), (1) Limit Stop FS/2 (491582), (1) Plastic Splinter Guard
(pack of 5 available as 491473), (1) Plug-It Power Cord, In
Systainer 4 (445597)
Packing & Sold In: Each
Item#
FJ561174
CIRCULAR SAW
Plunge Cut Design
• Festool model #: Kapex TS75EQ
• Cutting depth, 2-15/16” or 2-3/4” with the included guide rail
• 13 amps of adjustable power
• Weighs less than 14 lb.
• Quick and easy cutting depth adjustment
• Bevel unit allows you to swivel the blade by up to 45 degrees
on the guide rail for clean cut edges even on bevel cuts
• Detachable Plug-it cord, if the cord is damaged, plug in a new one
• Rotating dust extractor connector, easy to adjust the dust extraction
• Spring-loaded riving knife, retracts into the housing
automatically during plunge cuts
• MMC electronics with 6 control and monitoring functions, including
soft start, constant speed under load, stepless speed adjustment,
temperature and current-triggered overload protection
• FastFix saw blade changing system for easy blade change
• Triple motor bearing, improves running smoothness and
extends service life
• Zero-play guidance, adjust the saw base on the guide rail
without tools
• Splinter guard on both sides of the cut, guide rail rubber
splinter guard on one side, attachable plastic splinter guard
on the other
• Slip clutch drastically reduces the eects of kickbacks
• Includes: (1) 75” guide rail (491503), (1) Universal saw blade
(4953808, 36 teeth), (1) Limit stop FS/2, (491582),
(1) Plastic Splinterguard (pack of 5 available as 491473),
In Systainer 5
Packing & Sold In: Each
Item#
FJ561188
SLIDING COMPOUND MITER SAW
• Festool Model #: Kapex KS120
• Cutting depth 90º/90º: 12” x 3-15/32”
• Special cutting depth: 4-23/32” x 3/4”
• Flexible, removable dust hood to the rear of the blade deects the waste material in the directional dust port
• 50º left miter and 60º right miter position
• 13 amps of adjustable power
• Speed: 1,400 - 3,400 RPM
• Fully adjustable dual line lasers dene the cut are for precise cut placement
• MMC allows you to match the speed of the blade with the requirements of the material
• Oversized bevel scale facilitates precision angle setting
• FastFix saw blade changing system for easy blade change
• Weighs 47 lb.
• Includes: 60 tooth high quality carbide blade (495388), MiterFast angle transfer device,
Hold down clamp and Wrench
Packing & Sold In: Each
Item#
FJ561287
CIRCULAR & MITER SAWS
Power Tools
V
Power Tools