Operating instructions

Power Tools
V
Power Tools
Power Tools
V - 57
800-BUY-BAER (289-2237) • www.baersupply.com • Fax: [phone]
BLOW GUN
Plastic
• Ideal for vertical installations
• Noise reduced, meets OSHA
• Maximum working pressure 175 psi, 1/4” NPY inlet connection
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
Item# Box Qty
WW7149234 24
BLOW GUN
Full Flow Safety Lever
• Meets OSHA requirements of special relief holes in nozzle
which limits pressure to 30 PSI when dead ended (static pressure)
• Maximum working pressure: 150 PSI
• SCFM 10.0 @ 100 PSI
• 1/4” NPT air inlet, nozzle thread size: 7/16”-27
• Body outlet thread size 1/2”-27
Packing & Sold In: Each
Item#
MF150
BLOW GUN
In-Line Blow Gun
• Clean o work surfaces without disconnecting
• Only connect once; permanently mounts
between coupler and air hose to purge air line of
water and contaminants before starting up air tools
• Durable aluminum construction, weighs only 2 oz. (0.06 kg)
• Meets O.S.H.A. requirements of special
relief hole in nozzle which limits pressure
to 30 PSIG (2 Bar) when dead ended and
used on an air line of 150 PSIG
(10.3 Bar) or less
Packing & Sold In: Each
Item#
DY94467
BLOW GUN
Pocket Blo-Gun With Shirt
Clip Adjustable Aluminum
• Easy grip two nger control to adjust from full volume
air ow to complete shut o
• Knurled grip for secure handling even with oily or greasy ngers
• M-style (ts any 1/4” Industrial style coupler)
• Maximum inlet pressure: 150 PSI
• SCFM 15.9 @ 100 PSI
Packing & Sold In: Each
Item#
MF115
PORTABLE AIR
HAMMER
• For use on T-moulding
• Operating pressure 60-125 psi; air consumption 2-4 CFM
• Delivers 1,000 blows per minute
• Versatile, interchangeable tips of super-soft to hard plastic,
steel and aluminum, diameter of 1-1/2” (1 medium tip included)
• Palm size; lightweight
Packing & Sold In: Each
Item#
DAAH15M
BLOW GUN
Safety Blo-Gun with
Extensions
• Four safety by-pass holes allow air to escape if tip-hole is
blocked
• By-pass holes do not interfere with normal air ow
• Special internal design permits a restricted maximum
discharge of 30 psi
• Discharges same air volume as full ow blo-guns, while
maintaining required noise level and nozzle pressure
• Maximum inlet pressure: 150 psi
• 1/4” NPT air inlet, nozzle thread 1/2”-27
• Zinc alloy body
• OSHA compliant
Packing & Sold In: Each
Item#
MF131
PORTABLE AIR HAMMERS & BLOW GUNS
Power Tools
Power Tools