Operating instructions

Power Tools
Power Tools
V - 14
Würth Baer Supply Company • Over 40,000 products in-stock EVERYDAY!
Power Tools
GUIDE RAILS FOR PLUNGE ROUTERS
With Splinterguard
• For guidance of plunge saws or routers
• Cut mark matches the cut line with the zero clearance guide rail
• Quick setup with non-slipping bottom strips
• Repeat cuts with limit stops
• System integration, same rail for saw, router or jigsaw
• Bottom T-slot clamp
Packing & Sold In: Each
Item# Guide Rail Length
FJ491499 32”
FJ491504 42”
FJ491498 55”
FJ491503 75”
FJ491502 95”
FJ491937 106”
FJ491501 118”
FJ491500 197”
FJ491621 42” for 32mm Hole Drilling System
FJ491622 95” for 32mm Hole Drilling System
42” or 95” for 32mm Hole
Drilling System
32” Length to 197” Length
GUIDE RAIL ACCESSORIES
NOTE: For use with Festool® series guide rails only.
Packing & Sold In: Each
A
B
D
C
Description Item#
A
TOTE BAG
• Transport and store rails up to 1400mm
• Bag can store 2 rails up to 1400mm in the main pocket and another 800mm
rail in the front pocket
• Cloth strap handles and shoulder strap
FJ466357
B
REPLACEMENT SPLINTER GUARD
• Adhesive backed to maintain splinter free cut quality
FS-SP 1400 (55”) Splinterguard
FJ483164
FS-SP 3000 (118”) Splinterguard
FJ488467
C
GUIDE RAIL CONNECTOR
• Connects two guide rails by sliding into the T-slot grooves in the rails
• 2 adjustable set screws per end for a secure connection included
FJ482107
D
ANGLE UNIT
• Connects the upper T-slot of Festool® guide rails for setting angles on material
• 180˚ marked scale
• Transfer angles from the wall to the workpiece
FJ491588
E
GECKO GUIDE RAIL ADAPTERS
• Lever actuated suction cup pads
• Attach the Gecko clamp to clamp Festool® guide rails on non-porous materials
FJ493507
E
GUIDE RAILS & ACCESSORIES FOR PLUNGE ROUTERS
Power Tools
V
Power Tools