Specifications

3. After Sawing
a) Turn off the jigsaw but do not place it down until it has come to a complete
stop (danger of backlash).
b) Disconnect the saw when not in use.
c) Don’t touch the blade or work piece immediately; they may be extremely
hot, resulting in burns.
d) Remove the chips from the surrounding area with a brush-NEVER by hand.
e) Clean the saw-use a rag to clean the blade-careful that the cloth does not
hook on the teeth-NEVER clean while in motion.
f) Sweep the floor surrounding the saw and ensure to remove any slip, trip
hazards created by the debris.