Specifications

2.0 Pre-use Inspection Checklist
Check
Y
N
N/A
1
Is the power cord free of frays and damage?
2
Is the drill secure with no loose parts?
3
Is the work area free of slip/trip hazards?
4
Are flammable/combustible materials removed from the immediate work area?
5
Has the debris/material from previous operations been removed?
6
Are all tools/wrenches removed from the work area?
7
Are the drill, chuck and bit free from cracks and defects?
8
Are all screws securely tightened?
9
Are you aware of the direction of rotation?
10
Is the work piece free from nails, wires or other foreign objects? (the drill may be thrown and
hit someone or the tool can react dangerously, resulting in injury).
11
If using a hammer drill, have you selected the ‘action mode’? (to safely drill different types of
materials).
12
If using a hammer drill, have you selected the speed setting?
Comments/Corrective Action:
3.0 Safe Operating Procedure (SOP)
This procedure is outlined as follows:
 General Safety Guidelines
 Equipment Specific Safety Operating Procedure
3.1 General Safety Guidelines
Before using the machine, perform the following general safety checks:
a) Make sure you understand all of the instructional material before operating this equipment. Failure to follow safety
instruction and warnings may result in serious personal injury, fire or property damage.
b) If you have any questions or uncertainties, please ask your studio technician before use.
c) Long hair, scarves, loose clothing, jewellery and ties pose an entanglement hazard. Please make sure these are all
constrained prior to operating the equipment.
d) Do not conduct any maintenance or repairs on this equipment. In case of a defect, contact your technician.
e) Ensure the work area is both well-lit and organized.
f) Never operate under the influence of drugs, alcohol or medication.