Specifications

3.2 Equipment Specific Safe Operating Procedure (SOP)
1. Before using the spray booth
a) Have the spraying material (spray cans/airbrush) ready for use.
b) Read the MSDS for the chemical being used.
c) Put on required PPE
d) Turn on the ventilation system.
e) Prepare your material to be sprayed.
f) Use the spray booth only for spray painting and coating.
2. Using the spray booth
Picture 1
a) All spray painting should be done in the spray booth.
b) Place your material to be sprayed on a table, floor or hang them on the
wall.
c) Distance yourself from the work- do not place your face or hand(s) in front
of the spray mist.
d) Hold the spraying material in your hand and spray the work material from a
comfortable distance.
e) Spray downward onto your work and not up and away from it.
f) Leave the sprayed material in the booth for several minutes for drying.
g) Leave the ventilation system on.
3. After using the spray booth
a) Remove sprayed material from the spray booth.
b) Place the spray cans in appropriate area (flammable cabinet or designated
shelf).
c) Turn off the ventilation system.
d) Tidy up the spray booth.
e) Practice proper hand hygiene- wash hands with water-based cleanser.