Specifications

2.0 Pre-use Inspection Checklist
Check
Y
N
N/A
1
Is the ventilation system turned on?
2
Is the spray booth area free of slip/trip hazards?
3
Are flammable/combustible materials removed from the spray booth?
4
Has the debris/material from previous operations been removed?
5
Are the spraying materials (paints, primers, sealers, and other coatings) ready for use?
6
Is the spray booth free from electrical equipment, switches, lights, or other devices?
Comments/Corrective Action:
3.0 Safe Operating Procedure (SOP)
This procedure is outlined as follows:
 General Safety Guidelines
 Equipment Specific Safety Operating Procedure
3.1 General Safety Guidelines
Before using the machine, perform the following general safety checks:
a) Make sure you understand all of the instructional material and/or faculty and technician instruction for the
chemicals being used. Failure to follow safety instruction and warnings may result in serious personal injury, fire or
property damage.
b) If you have any questions or uncertainties, please ask your studio technician before use.
c) Make sure any sort of electrical equipment and power cords are kept away from the spray booth.
d) Do not conduct any maintenance or repairs on the spray booth. In case of a defect, contact your technician.
e) Ensure the work area is both well lit and organized.
f) Never operate under the influence of drugs, alcohol or medication