Specifications

• DOK-DIAX01-MAIN+2AD+1M-ANW1-EN-E1,44 • 07.97
61
3. Controller Functions
Fkt-Spindellagegeber
Display:
0°
90°
180°
270°
360°
spindle
position
POS ORDER
POS ORDER
INPOS INPOS INPOS
positoning direction ( FUNCT 2 ) = < 16 > as per rotational direction
qualifying sign N command value
e.g.,
e.g.,
A07
A09
A10
A08
(OFFSET)
(POS 2)
(POS 3)
(POS 1)
P21
(P-WINDOW)
S = S
command
S = S
command
S
X2/21
spindle
speed
X2/7
INPOS
X2/25
RUN
X2/26
POS 1
X2/27
POS 2
P18
(POSRPM)
spindle accelerates
to speed command value
A06
N = CMD N * CMD N = CMD
S
POS ORDER
Note:
The value of the OFFSET parameter is the angle between the spindle
positioning reference point and the spindle feedback zero pulse.
Figure 46: Operating sequence for spindle positioning via spindle feedback (e.g.,
direction of rotation as per sign of applied speed command value)