Specifications

• DOK-DIAX01-MAIN+2AD+1M-ANW1-EN-E1,44 • 07.97
33
2. Operating the Controllers
A parameter form for listing parameters is in section 5. This allows the
values as supplied, and those modified by the user, to be recorded.
The permissible ranges of parameter values are also shown in the form.
2.3.3 Changing the Parameters
The user parameters (A, P, Q, R and S) are given default values at the
factory. Parameter values may need to be changed to match the drive to
a special application.
The drive-specific motor parameters (m) have been optimized at the
factory. They may only be modified by trained personnel, as otherwise
the drive can be damaged. Exceptions are the M03 T-filter and M15
MOTFUNCT parameters (see section 5, parameter overview or list).
The parameter values are protected against unintentional modification
by a code.
Display Definition
output state
key
pad
Operating mode switch
ready to leave
P parameters
display of a
P parameter
change in
Q parameters
number activating
for scrolling
change in
R parameters
and so on
.
.
.
.
.
.
(any)
2x
We
c
P 06 . . . . .
R 06 . . . . .
Q 06 . . . . .
Q 06 . . . . .
P 06 . . . . .
Recording the parameter
values
Figure 13: Changing the displayed parameter records