Specifications

• DOK-DIAX01-MAIN+2AD+1M-ANW1-EN-E1,44 • 07.97
32
2. Operating the Controllers
2.3.2 Reading the Parameters
Display Definition
output state
key pad
Operating mode switch
parameter name
display
RAMP 1
RPM 1
parameter no. P 01
with value
automatic return to
parameter number
parameter no. P 02
with value
parameter name
display
parameter no. P 03
with value
automatic return to
parameter number
and so on
.
.
.
.
.
.
.
.
.
P 01 . . . . .
P 01 . . . . .
P 02 . . . . .
P 02 . . . . .
P 03 . . . . .
Parameter protocol!
☞
6 Parametersätze
Parameter Record A (general parameters)
Parameter Record M (motor parameters)
Parameter rec.
P
Parameter rec.
Q
Parameter rec.
R
Parameter rec.
S
Figure 11: The six parameter records of Indramat main spindle drives
Reading a parameter record
Figure 12: Reading a parameter record, e.g., parameter record P
Changing to another
parameter record
The parameter values can be called up into the display in the parameter
mode. They are subdivided into six parameter records:
Parameter records A and M are permanently active, so is one of the four
selectable parameter records P, Q,R or S.
The parameter number, value and name can be displayed via the
keyboard.
The other parameter records have to be displayed in order to read all the
parameters. After changing to one of the other parameter records, the
system for reading the parameter records as described is repeated.