Specifications

• DOK-DIAX01-MAIN+2AD+1M-ANW1-EN-E1,44 • 07.97

2. Operating the Controllers

Indramat main spindle drives make a wide range of functions available

for numerous applications. The drives can be easily matched to specified

applications.

The controllers are operated via the control panel, provided that the

controllers are supplied with control voltage, i.e., commissioning must

have already been carried out to a large extent.

2.1 The Control Panel

The control panel is located on the front panel of the controller. It is used

for drive and fault diagnoses, checking and setting parameters. The

green LED indicates the drive is OK, the red LED comes on with a fault.

The mode switches enable the main spindle drive to be changed from the

operating mode to the parameter mode.

The main spindle drive is ready for power input or power output. The

mode switch is set to the right.

Power output from the main spindle drive is inhibited. Parameters can be

checked and changed. The mode switch is set to the left.

ParameterReady Fault

green red

operating

mode switch

display

keypad

with arrow keys for:

right

left

down

and accept key:

center

Figure 6: Control panel with legends

Operating mode

Parameter mode