User manual

14 | English
1 609 92A 269 | (10.2.16) Bosch Power Tools
Intended Use
The measuring tool is intended for swift finding of pulsating laser beams.
Technical Data
Product Features
The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Button for selecting the measuring accuracy
2 On/Off button
3 Audio signal button
4 Display
5 Magnet plate
6 Direction LED “move downward”
7 Centre-indication LED
Laser Receiver LR 2
Article number
3 601 K69 100
Working range
1)
5–50m
Receiving angle
90°
Measuring accuracy
2)
–“Fine”
–“Coarse”
±1mm
±3mm
Operating temperature
–10 °C...+50 °C
Storage temperature
–20 °C...+70 °C
Battery
1x9V(6LR61)
Operating time, approx.
30 h
Weight according to EPTA-Procedure 01:2014
0.27 kg
Degree of protection
IP 54 (dust and splash water
protected)
Dimensions (length x width x height)
74 x 41 x 150 mm
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun
irradiation).
2) Depends on distance between laser receiver and line laser
The measuring tool can be clearly identified with the serial number 12 on the type plate.
OBJ_BUCH-821-004.book Page 14 Wednesday, February 10, 2016 8:48 AM