Datasheet

5.
6.
7.
8.
PROJECT NO. 2
Tip for varnishing:
Before applying a second coat, you
must sand the surface a second time
with sanding paper with a grit of 240.
Once again, you must always sand in
the direction of the wood grain.
Then repeat the application.
5. Fasten the seat back supports and
simultaneously fit the attachment strip
6. Sand the wood surfaces
7. Varnish the surfaces: First read the manufacturer’s
safety and handling instructions thoroughly. Make
sure the room you are working in is well ventilated
and not used for smoking, eating or drinking.