Datasheet

2.
3.
4.
1.
Project No. 2
Garden lounger
1. Base frame: Cut out the handle opening
2. Base frame: Mount the legs
and square timbers
3. Base frame: Mount the casters
4. Fasten the slatted frame parts and connect them with the piano hinge
Tip 2 for drilling:
Referring to the details in the illustration,
predrill the square timbers that will
later support the slatted frame and mount
them using a cordless screwdriver and
flat head screws (4 x 60 mm). See tip 1
above on screwing together two pieces
of wood. Then screw the short legs to
the sides from above through the
square timbers using the flat head
screws (4 x 60 mm).