Datasheet

2.
3.
4.
1.
1. Fasten together the legs and cross connectors
to form base frames
4. Fit the reinforcement panels
2. Join the base frames with the frame surrounds
3. Mount the table slats with screws
Tip 1 for drilling:
In the piece where you want
to insert the screws first, always predrill
a hole that is 0.5 to 1 mm larger than
the screw diameter.
The hole should be countersunk for
the screw head. In the piece that you
are going to drill second, predrill a
hole that is always 1 mm smaller
than the screw diameter.