User's Manual

ROAMEO System Installation 65
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Configure the Beltpack to its Home AP-1800
To assign a beltpack to an access point channel, do the following:
1. From the Device Catalog on the left, select the AP-1800.
The Channel Configuration populates.
2. Power up the beltpack.
The BP ID displays on the front panel. This is a 10 digit, hexadecimal number in the format of: BP00:09:XX:XX:XX.
3. In the DECT BPID, enter the beltpack ID to assign to that channel.
4. From the Changes menu, select Send Changes.
The Send Changes window appears.
5. Click OK.
The changes are sent to the access point. The AP stores the BPID even if power is disconnected.