User's Manual

30 System Overview ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Home to Visitor Roaming
When a beltpack roams from its Home AP to a Visitor AP, a new OMNEO connection is made between both access points.
However, before the new connection’s OMNEO channel is used, the new DECT RF connection must be confirmed as good.
The new DECT RF connection is made before breaking from the old connection. This means the existing DECT RF link to the
Home AP is maintained until the new DECT RF link to the Visitor AP is confirmed. When the connection is confirmed, the
existing DECT RF link is dropped and the new OMNEO channel from the Visitor AP is used.
FIGURE 9. Home Access Point to Visitor Access Point Roam System Drawing