User's Manual

Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
CHAPTER 9
Maintenance
Access Point
Update Access Point Firmware
To update the Access Point firmware, do the following:
1. Open the Firmware Upload Tool.
2. From the File menu, select Options.
3. Click the Change button.
A network folder appears.
4. Navigate to the folder holding the AP-1800 firmware.
5. Click OK.
The network folder window closes.
6. Click OK.
The Option window closes.
7. Click the OAP tab.
A list of OAP devices appears in the main window.
8. Select the AP-1800 device to upload the new firmware.
9. Click the Upload button.
The Select Firmware for Upload window appears.