User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
116 Beltpack Overview ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Carrier Field
The Carrier field displays the RF Carrier the beltpack is currently using. European units and most countries around the world
have 10 carriers available, while the US and Canada have five carriers available. For more information on frequency
operation, see “Frequencies Of Operation” on page 23.
Slot Field
The Slot field displays the carrier slot the beltpack is assigned on the carrier. Each carrier has 24 slots available for
transmitting packets. The first 12 slots are dedicated for access point to beltpack transmission while the second 12 slots are
dedicated for beltpack to access point transmission. Narrowband configuration uses one slot for transmission and wideband
uses two slots for transmission.
AP ID Field
The AP ID field displays the ID of the access point currently hosting the beltpack. Access points are assigned a unique number
by the user when configuring the system. All access points in the system must have a unique AP ID.
RSSI Meter Display
The RSSI Meter display indicates the signal strength of the RF transmission. RSSI (Received Signal Strength Indicator)
measures the power the beltpack is receiving from an access point.
RSSI ranges from 0 (no strength) to 216 (full strength).
QF Meter Display
The QF Meter display indicates the QF (Quality Factor). QF is a number based upon the amount of packets being received by
the beltpack from the access point.
The QF meter ranges from 0 (no packets) to 10 (no missing packets).
FIGURE 29. Site Survey Screen