User's Manual

ROAMEO System Beltpack Overview 113
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Key Assignments
The Key Assignment menu is used to set the beltpack button assignments locally, without using the AZedit software.
How to assign a call assignment to a button on the beltpack
To assign a call assignment to a button on the beltpack, do the following:
1. On the beltpack, press the MENU button.
The main menu appears.
2. Using the up and down buttons, scroll to the assignment icon.
3. Press the SELECT button.
The four button assignment columns appear.
4. Using the up and down buttons, navigate to the button column to configure an assignment.
5. Press the SELECT button.
A scroll list of assignment types appear.
IMPORTANT: To clear an entry, select Clear Entry located at the bottom of the assignment type list.
6. Using the up and down buttons, select the assignment type desired.
7. Press the SELECT button.
The available alpha assignments appear. The assignment appears on the button in the front display screen
8. Using the up and down buttons, select the alpha assignment desired.
9. Press the SELECT button.
A list of talk/listen auto-functions appear. For more information, see “Key Assignment Types and Descriptions” on
page 73.
10. Using the UP and DOWN arrow buttons, select the talk/listen option to be placed in the location.
11. Press the SELECT button.
The new alpha settings of the four top panel buttons appear in the beltpack display screen.
12. Repeat step 1 through step 11 to select alphas for the other locations or the Talk/Listen functions in the same
location.
FIGURE 26. Key Assignment Screen