User's Manual

ROAMEO System Beltpack Overview 107
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
5. Using the UP and DOWN arrow buttons, enable the flip screen.
The 2-position indicator turns green.
OR
Using the UP and DOWN arrow buttons, disable the flip screen.
The 2-position indicator returns to the original disabled blue.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
The front display screen’s orientation is flipped.
Master Talk Switch
The Master Talk Switch menu is used to enable the master talk switch feature. When master talk switch is enabled, latched
talk keys go into a ready state waiting for the switch to be pressed. When pressed, the latched talk keys become active. Then,
when the switch is released, the latched talk keys go back to the ready state.
When the master talk switch menu item is enabled, the volume encoder knob on the top of the beltpack acts as the master talk
switch. This means once the master talk switch is enabled, any time the knob is pressed, any latched on talk key turns active.
IMPORTANT: When the Master Talk Switch is active, Talk and Listen keys function normally. Tapping a talk key turns
the key on or off, regardless of the master talk key status. This means no keys are locked in the on or off
position. No keys are permanently associated with the Master Talk switch.
To enable/disable the master talk switch, do the following:
1. Using the UP and DOWN arrow buttons, select the brightness icon.
2. Press the SELECT button.
The brightness menu options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the master talk switch icon.
4. Press the SELECT button.
The call waiting enable/disable 2-position indicator becomes active.
5. Using the UP and DOWN arrow buttons, enable the master talk switch.
The 2-position indicator turns green.
OR
Using the UP and DOWN arrow buttons, disable the master talk switch.
The 2-position indicator returns to the original disabled blue.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
To use the master talk switch feature, do the following:
1. Latch the talk keys on desired.
The latched-on talk keys are in a ready state and the Talk LED turns amber.
2. Press and hold down or latch the master talk switch.
Any latched on talk keys become active and the Talk LED turns red.
3. Release the master talk switch.
Any latched talk keys go back to the ready state and the Talk LED returns to amber.