User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
104 Beltpack Overview ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Brightness
Talk/Listen LED Buttons
The Talk/Listen LED menu is used to adjust the brightness of the Talk/Listen buttons on the top panel of the TR-1800
ROAMEO beltpack.
Brightness ranges from 0% to 100%.
By default, Talk/Listen LED brightness is set at 20%.
To configure the LED brightness, do the following:
1. Using the UP and DOWN arrow buttons, select the Brightness icon.
2. Press the SELECT button.
The brightness setting options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the LED brightness icon.
4. Press the SELECT button.
The brightness adjustment slider becomes active.
5. Using the UP and DOWN arrow buttons, adjust the LED brightness, as needed.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
Front Display Brightness
The Front Display Brightness menu is used to adjust the brightness of the front display on the TR-1800 ROAMEO beltpack.
Brightness ranges from 0% to 100%.
By default, Front Display brightness is set at 20%.
To configure the front display brightness, do the following:
1. Using the UP and DOWN arrow buttons, select the Brightness icon.
2. Press the SELECT button.
The brightness setting options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the Front Display icon.
4. Press the SELECT button.
The brightness adjustment slider becomes active.
5. Using the UP and DOWN arrow buttons, adjust the front display brightness, as needed.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
FIGURE 24. Brightness Settings