User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
100 Beltpack Overview ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
1. Using the UP and DOWN arrow buttons, select the Speaker icon.
2. Press the SELECT button.
The speaker setting options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the AUX DIM icon.
4. Press the SELECT button.
The Aux DIM slider bar becomes active in the beltpack display screen.
5. Using the UP and DOWN arrow buttons, adjust the Aux DIM, as necessary.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
Volume Limit M enu
The Volume Limit menu item is used to reduce the maximum volume the headphone out amplifier can provide. 100% is full
output.
Limit volume ranges from 0% to 100%.
By default, this field is set to 100%.
To set the max volume allowed, do the following:
1. Using the UP and DOWN arrow buttons, select the Speaker icon.
2. Press the SELECT button.
The speaker setting options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the Volume Limit icon.
4. Press the SELECT button.
The Max Volume slider bar becomes active in the beltpack display screen.
5. Using the UP and DOWN arrow buttons, adjust the Aux DIM limit, as necessary.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
Headset Select Menu
The Headset Select menu is used to select between a 5-pin XLR connector headset or a 3.5mm connector headset.
To select the headset connector, do the following:
1. Using the UP and DOWN arrow buttons, select the Speaker icon.
2. Press the SELECT button.
The speaker setting options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the Headset Select icon.
4. Press the SELECT button.
The XLR headset connector icon and 3.5mm headset connector icon become active in the beltpack display screen.
5. Using the UP and DOWN arrow buttons, select the XLR connector icon or the 3.5mm connector icon.
6. Press SET.
The selection is made.
7. Press and hold the MENU button to exit the menu.